RFE-7B-HP - Dodge Chrysler Mopar Transgo Tuneless™ Reprogramming Kit™ 45RFE, 545RFE, 65RFE, 66RFE and 68RFE 7-check ball valve body 1999-2010
Tuneless™ Reprogramming Kit™
45RFE, 545RFE, 65RFE, 66RFE and 68RFE
7-check ball valve body 1999-2010
*Transmission Removal Required*
*Performance*
*Tow/Haul*
*Tuneless*
***See And Click Below To Purchase RFE-5B-HP If You Have A 5-Checkball Valve Body***
- Buy 5 for $327.75 each and save 5%
- Buy 10 for $310.50 each and save 10%
This RFE-7B-HP High Pressure Tuneless™ Reprogramming Kit™ fits 1999-2010 units with 7-check ball valve body only.
If you have a 5-checkball valve body, you need RFE-5B-HP.
Corrects/Prevents/Reduces:
Burnt OD frictions due to increased engine horsepower
Rough lock-up
TCC slide bang
TCC slip codes
Drain-back
Limp-in mode
Low line pressure and code P0868
Includes:
Patent pending triple valve body separator plate
Valve body gaskets
PR valve spring
New drop-in torque converter limit valve system
Drill jig, drill bit and deburring tool
Heavy duty accumulator plate/cover
Recalibrated OD accumulator springs and shim
Replacement self-cleaning low/reverse switch valve as well as the end plug
TransGo engineered accumulator seals
TCC recalibration accumulator springs and retainer
Heavy duty snap ring for input drum
Optional TCC control valve for use with triple discs converter
Notes:
High mileage vehicles sometimes come in with codes P0841, P0871, P0988, P1775 and P1776 due to wear at the solenoid switch valve bore in the valve body. If you need to address solenoid switch valve bore wear, then also check out our solenoid switch valve kits.
Optional Upgrade:
The TransGo hot-forged 1045 steel fully CNC machined overdrive pressure plate RFE-PP-ODHP allows you to quickly and easily add extra capacity to the overdrive clutch pack in all models. Also, this pressure plate is a direct fit for the OEM drum. Consequently, there is no need for you to spend a small fortune on an aftermarket drum. When using this pressure plate, you can add two overdrive frictions for single sided application and one overdrive friction for double sided application. For single sided friction setup like in the 68RFE, the new stack up yields a 15% increase in surface area. Alternatively, for double sided friction setup like in the 545RFE, the end result is a 25% increase in surface area.
***See And Click Below To Purchase RFE-5B-HP If You Have A 5-Checkball Valve Body***
Manufacturer | Transgo |
---|---|
Condition | New |
Item Returns | This item can be returned |