R36008BS1_L2 (67-3) (2WD) - Ford C6 Raybestos Performance Transmission Rebuild Gas Transgo 67-3 1976-96 2WD
$978.48
SKU
R36008BS1_L2 (67-3) (2WD)
Ford C6 Transmission Performance Raybestos Red Stage 1 Friction Deluxe Level 2 Rebuild Kit 1976-96 Gas 2WD
- Buy 5 for $929.56 each and save 5%
- Buy 10 for $880.63 each and save 10%
Earn Up to 978 Transparts Reward Points.
Ford C6 Transmission Performance Raybestos Red Stage 1 Friction Deluxe Level 2 Rebuild Kit 1976-96 Gas 2WD
This rebuild kit includes Performance Stage 1 Red Raybestos Friction Plates, Kolene Steel Clutch Plates, Sealing Rings, Metal Clad Seals, Gaskets, O-rings & Rubber Piston Seals, 2wd Filter, Band, Modulator, Complete Bushing Kit + Washer Kit, "R" Ratio Servo Piston Kit Upgrade, TCS Billet Input Shaft, Transgo Reprogramming Kit!!!
"R" Ratio Servo Piston Kit details-
Mid '68-later
Since its introduction in 1969 with the 428 SCJ, the R code servo has remained the trick piece for C6 builders needing additional band apply force. Sonnax R code servo kit K36528R for C6 (mid 68-later) units features a no-leak pin which uses one O-ring and one PTFE ring to eliminate back pressure and leakage due to worn case bores. A replacement seal kit K36528R-SK also is available.
More than 9 square inches of apply surface for more band apply force No-leak servo pin design allows the servo piston to be used in worn bores
Two selective return Springs allow for timing of shift quality
C-6 Billet Input Shaft
Shaft is CNC machined from 300M steel for maximum torsional strength.
For high torque diesel and off-road applications.
Heat treated and precision ground.
Shaft is rated to 2000 ft/lbs. of torque.
Transgo 67-3 Reprogramming Kit
Note: This kit does not work in Diesel-engined vehicles.
Includes items to restore proper function to Valve body with conversion to Stick Shift/Manual operation.
Features: This kit converts the valve body into a Stick Shift/Manual shift, which has no automatic shifts. This kit also has the option to be set up initially or converted back to automatic operation/shifting with minimal changes if desired.
Raises overall line pressure. Firm shift performance. A wonderful addition to your OEM Classic vehicle, Competition, Off road, Pro-street or all out Race car when desiring full manual operation of transmission.
Installation recommendation: Experienced technician
Transmission removal necessary: No
NOTE: This kit comes with a 2WD filter, if you have a 4wd please see our other listing.
Stage-1
About:
Raybestos Stage-1 Performance frictions are an affordable solution for performance applications that may not require the capacity of the Gen2 Blue Plate Special, but do require a friction plate that can handle the demands that a stock tan or high energy plate cannot. Stage-1 frictions are not limited to performance, but also enhance heavy duty applications by increasing holding capacity, while being able to withstand higher temperatures associated with towing heavy loads. Raybestos Stage-1 Performance frictions are the best choice for street rods, tuner cars and mild street strip applications.
Advantages:
· Withstands high horsepower
· Greater torque capacity
· Maintains piston travel
· Optimum performance
· Higher heat resistance
· Smooth engagements
· Enhanced shift feel
All these Kits have Clutches Manufactured by Raybestos (Red) and Gasket Sets made by Precision
Don't get caught with a kit of lesser Quality!
Manufacturer | Raybestos |
---|---|
Item Returns | This item can be returned |