FM128 - Ford C6 Transmission Non Lock Up Torque Converter Low Stall 1.375" Pilot
Ford C6 1971-On Transmission Non Lock Up Torque Converter, 12.75" Body Diameter, Milled 2 Flats Stepped Hub Type, 4 Mounts, Threaded Studs, Round Pads Mount Type, 11.417" Bolt Circle, 1.375" Pilot Outside Diameter, No Ring Gear, Medium Stall, 31 Turbine Splines, Smooth or Ribbed Primary
- Buy 5 for $227.05 each and save 5%
- Buy 10 for $215.10 each and save 10%
Ford C6 1971-On Transmission Non Lock Up Torque Converter, 12.75" Body Diameter, Milled 2 Flats Stepped Hub Type, 4 Mounts, Threaded Studs, Round Pads Mount Type, 11.417" Bolt Circle, 1.375" Pilot Outside Diameter, No Ring Gear, Medium Stall, 31 Turbine Splines, Smooth or Ribbed Primary
Years | Vehicle |
Drive Types |
1971 - 1976 1971 - 1979 1971 - 1977 1971 - 1973 1971 - 1976 1975 - 1976 1971 - 1974 1990 - 1996 1971 - 1996 1971 - 1996 1975 - 1996 1971 - 1983 1975 - 1975 1996 - 1996 1977 - 1996 1975 - 1996 1975 - 1991 1975 - 1996 1975 - 1996 1975 - 1996 1975 - 1983 1975 - 1983 1974 - 1976 1971 - 1972 1978 - 1994 1977 - 1979 1972 - 1976 1971 - 1971 1971 - 1979 1971 - 1974 1971 - 1976 1971 - 1980 1975 - 1980 1971 - 1971 1971 - 1979 |
Ford Torino Ford Thunderbird Ford Ranchero Ford Mustang Ford LTD Ford Gran Torino Ford Galaxie 500 Ford F-53 Motorhome Chassis Ford F-350 Ford F-250 Ford F-150 Ford F-100 Ford Elite Ford Econoline Super Duty Ford E-350 Econoline Club Wagon Ford E-350 Econoline Ford E-250 Econoline Club Wagon Ford E-250 Econoline Ford E-150 Econoline Club Wagon Ford E-150 Econoline Ford E-100 Econoline Club Wagon Ford E-100 Econoline Ford Custom 500 Ford Custom Ford Bronco Lincoln Mark V Lincoln Mark IV Lincoln Mark III Lincoln Continental Mercury Monterey Mercury Montego Mercury Marquis Mercury Grand Marquis Mercury Cyclone Mercury Cougar |
RWD RWD RWD RWD RWD RWD RWD 4 X 2 RWD, 4WD RWD, 4WD RWD, 4WD RWD, 4WD RWD 4 X 2 RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD 4WD RWD RWD RWD RWD RWD RWD RWD RWD RWD RWD |
Name | |
Billet Cover Body Diameter Inches Body Diameter mm Bolt Circle Inches Clutch Configuration Clutch Damper Position Cooling Shroud Dimple Pitch Hub Gear Signature Hub Internal Bushing Hub Length Inches Hub OD Major Inches Hub OD Minor Inches Hub Seal Groove Hub Type Lock-Up Unit Mount Threads Mount Type Number of Mounts OE End Play OE Height Inches Package UOM Pilot OD Major Inches Pilot Type Pump Stall Quantity Per UOM Remanufactured Stator Rotation Stator Spline Count Stator Spline Depth Inches Stator Vane Count Turbine Hub Seals Turbine Internal Spline Count Turbine Spline Depth Inches Turbine To Piston Drive Turbine to Pump Clearance Weight Weight UOM With Ring Gear |
No 12.75 323.9 11.417 NA NA No Medium 6 0.37 No 2.33 1.996 1.982 No Milled 2 Flats Stepped No 38 x 24 Threaded Studs, Round Pads 4 0.015 5.935 Each 1.375 Straight Medium 1 Yes Clockwise 32 3.295 11 NA 31 4.757 NA 0.105 28.99 Pounds No |
Recon Limited Warranty
All Recon by Transparts torque converters supplied are warranted to be free from manufacturing defects in material and workmanship for a period of four years or 48,000 miles from the date of purchase whichever occurs first this warranty is void, and no warranty shall apply to products that have been altered, improperly installed, maintained or repaired contaminated with oil or grease; damage as a result of overheating by accident, negligence, misuse, race or off road use or any other unauthorized use.
The above warranty is exclusive and in lieu of any other express or implied warranty of merchant ability fitness for a particular purpose or other warranties of quality, guarantees or representation, whether express or implied, except the warranty of the title. Further, all express or implied warranties with respect to the products sold are limited to the duration of this warranty or the warranty of any third party customer, supplier, dealer, jobber, provider, manufacturer, or distributor of such products supplied hereunder, whichever is less, and specifically does not exceed and/or replace any such third party warranty.
Any and all parts returned to Transparts for warranty claim must be returned through the customer, dealer, jobber, provider, or distributor from whom it was purchased in accordance with applicable policy and procedure, with a written explanation of how the part was installed and operated. Transparts reserves the right to inspect and examine all parts returned for warranty claim to determine whether or not any such part has failed because of a defect in material or workmanship. The obligation under this warranty shall be strictly limited to replacing or crediting at Transparts option, any part found to be so defective. This warranty excludes, and transports shall not be liable for, any labor charges or other special, punitive, incidental, exemplary or consequential damages (including limitation, lost revenues, or profits), regardless of whether such damages were foreseeable and whether or not Transparts was advised of the possibility of such damages. In no event shall Transparts aggregate liability exceed the total amount paid to Transparts with respect to the product sold. The above sets for Transparts sole liability and entire obligation, and exclusive remedy for any action that is brought against Transparts.
No Core charge will be added to your order if we want to get the core back we will include a prepaid UPS call tag to retrieve it.
Any converter or combined order total over $100.00 shipping is FREE!!
Manufacturer | Recon |
---|---|
Condition | Remanufactured |
Item Returns | This item can be returned |