34910-01K - Chevy TH400 TH425 Turbo 400 Transmission Boost Valve Kit Sonnax
Sonnax 400 425 Transmission Boost Valve Kit 34910-01K
Vehicles with a GM 400 transmission frequently have poor line rise, soft 1-2 and/or 2-3 shifts and/or reverse engagement difficulties. These problems can be caused by the reciprocating boost valve wearing the inside diameter of the boost sleeve. When this occurs, oil that enters the modulated throttle valve orifice leaks past the boost valve and exhausts through the reverse orifice or to the sump, resulting in poor line rise. Reverse oil also can exhaust both to the sump and back through the modulated TV orifice. The outside diameter of the boost sleeve also allows some leakage through the pump body, which can increase boost oil loss. Sonnax boost valve kit 34910-01K eliminates the above problems by restoring hydraulic integrity and providing a positive seal with the pump bore.
Valve and sleeve manufactured from high-quality steel
O-rings provide additional protection against leakage through the pump body to assist in maintaining pressure in the circuits which supply the boost valve
Kit uses the same valve spool diameters as the OE version to retain factory shifts
Contents
Valve
Sleeve
O-Rings (2)
Earn Up to 36 Transparts Reward Points.
Sonnax 400 425 Transmission Boost Valve Kit 34910-01K
Vehicles with a GM 400 transmission frequently have poor line rise, soft 1-2 and/or 2-3 shifts and/or reverse engagement difficulties. These problems can be caused by the reciprocating boost valve wearing the inside diameter of the boost sleeve. When this occurs, oil that enters the modulated throttle valve orifice leaks past the boost valve and exhausts through the reverse orifice or to the sump, resulting in poor line rise. Reverse oil also can exhaust both to the sump and back through the modulated TV orifice. The outside diameter of the boost sleeve also allows some leakage through the pump body, which can increase boost oil loss. Sonnax boost valve kit 34910-01K eliminates the above problems by restoring hydraulic integrity and providing a positive seal with the pump bore.
Valve and sleeve manufactured from high-quality steel
O-rings provide additional protection against leakage through the pump body to assist in maintaining pressure in the circuits which supply the boost valve
Kit uses the same valve spool diameters as the OE version to retain factory shifts
Contents
Valve
Sleeve
O-Rings (2)
Manufacturer | Sonnax |
---|
Write Your Own Review