The TCC apply valve acts as the switch valve for converter apply and release. The TCC regulator valve (84754-01K and 84754-08K) controls TCC apply pressure. Both the apply valve and the regulator valve can cause slip codes. When the apply valve is worn, it often returns to the unapply position even though the TCC apply solenoid remains energized. Generally the apply valve causes larger changes in slip RPM as the converter cycles from apply to full release. The regulator valve causes a more gradual load and heat-sensitive slip. Check for changes in slip RPM with a scanner or changes in cooler flow with the Sonnaflow® FM-01KA. PTFE seal prevents loss of signal oil that strokes the valve Oversized versions available to restore the valve body bore Standard-size versions are drop-in replacements and do not require valve body removal Tool kit services both early and late models. Contents: Valve PTFE Seal Spring