4L80E-HD2 - Chevy 4L80E 4L85E Transgo Transmission Reprogramming Shift Kit 1991-ON 4L80E-HD2

This 4L80E Performance Reprogramming Kit fits 1991 to 2013 General Motors vehicles equipped with 4L80E and 4L85E automatic transmissions.  Common complaints on these transmissions are no upshifts, soft 2-3 shifts, burnt direct frictions, broken hard parts as well as gear ratio and solenoid performance codes.

The boost valve assembly is notorious for wear causing both low pressure as well as runaway boost pressure. With the low boost pressure problem, the resulting complaints are a soft 2-3 shift, direct clutch failure as well as the gear ratio and solenoid performance codes. On the other hand, the runaway boost pressure problem can result in a costly broken case, direct drum and piston failure.

Features and benefits:

The TransGo 4L80E Performance Reprogramming Kit includes valve body, pump and internal components that are calibrated to work in concert with an elevated line pressure curve that will greatly improve the overall durability and shift feel of the transmission. Also, the laminated triple separator plate provides dual feed for the 3^rd gear clutch without having to dismantle the transmission. Dual feeding the 3^rd gear clutch triples the torque capacity of the 3^rd gear clutch which is the Achilles heel of this transmission. In addition, the included highly improved wide land design boost valve and bushing resists wear so that pressure regulation functions consistently for the long haul. Lastly, the EPC boost pressure relief valve system provided helps protect against accidental runaway boost pressure to stop the case and direct drum failure.

Corrects/Prevents/Reduces:

High pressure parts breakage

Soft 2-3 shift

Burnt direct clutch

Slow 3-2 downshift

No upshifts

Harsh 1-2 shift

Low pressure due to solenoid filter breakup

Codes 39, 68, 85, 86, 87, P0731, P0732, P0733, P0734, P0751, P0756, P0894 and P1870

Includes:

Heavy duty intermediate case snap ring

(2) Accumulator valve springs, end plug and O-ring

Actuator filter tapered plug, O-ring, spring and end plug

Relief valve system plate, valve, spring, e-clip and nuts

Laminated triple separator plate

Valve body and accumulator body gaskets

(2) Drill bits

3^rd accumulator spring

USA-made hardened boost valve and bushing

Pressure regulator valve spacer, washer, springs and snap ring

New stronger 4^th feed bolt and washer

1-2 accumulator spring

(16) Direct clutch return springs

***See Below For Information On Avoiding Counterfeits***