028907FHPPWR_DLX - Dodge A618 48RE Transmission Alto Red Eagle High Performance Power Pack Rebuild Kit 2003-ON

High Performance Dodge A618 48RE 2003-ON Rebuild Power Pack Kit This rebuild kit includes all of the High Performance Red Alto Friction Plates, Kolene Steel Plates (with Power packs in the Front, Rear and Overdrive drums, Sealing Rings, Metal Clad Seals, Gaskets, Orings, rubber Piston Seals, High performance kevlar flex Band, filter, pump bushing and Direct Drum Bushing. Three power packs are included in this kit here is the components that make them up- Alto# 028755 Front Power Pack Contents: (7) 028742A155 (.061” 1.55mm) Red Eagle Friction Plates (6) 028701K (.068” / 1.72mm) Kolene Steel Plates (2) 028701K216 (.085” / 2.15mm) Kolene Steel Plates (1) 028761X (.170 / 4.32mm) Pressure Plate Alto# 028756A Rear Power Pack Contents: (5) 028748-160 (.63” / 1.60mm, 93 Teeth) Red Eagle Friction Plates (2) 028701K (.068” / 1.73mm) Kolene Steel Plates (2) 028701K150 (.059” / 1.50mm) Kolene Steel Plates (1) 028252-060 (.060” / 1.50mm) Snap Ring (1) 028252-074 (.074” / 1.88mm) Snap Ring (1) 028761X (.170 / 4.32mm) Pressure Plate Alto# 028757 Overdrive Brake Clutch Power Pack (7) 027746-165 (.065” / 1.65mm) Red Eagle Friction Plates (7) 027723K (.068” / 1.73mm) Kolene Steel Plates (1) 027763A Stepped Bottom Pressure Plate This Transmission Kit is one we sell everyday to Transmission Shops, it fits the A618 48RE 2003-ON This Transmission Kit is a great way to add performance to your transmission! The Red eagle friction and Kolene Steel plates are the best quality material you can stack your drums with! In addition to the Performance grade friction and steel material you are also getting the PowerPack update in the Front, Rear and Overdrive drums!!! The Power pack has additional clutches to increase friction plate capacity. This allows for an increased torque load with reduced heat generation. These plates are Red Eagle high performance clutch plates. These clutches are put through a process where the friction paper is saturated in a phenolic resin, cured, and then saturated a second time in a silicate. The silicate imparts high heat resistance. So why not use what the professionals use! All these Kits have Clutches Manufactured by Alto(red eagle clutches) and Gasket Sets made by the Co. TRANSTEC Don't get caught with a kit of lesser Quality!