22173D-01K - 48RE Transmission Sonnax Extreme Duty Output Shaft Kit
48RE Transmission Sonnax Extreme Duty Output Shaft Kit 22173D-01K
For use in 2003-2006 4WD models with NV271 or NV273 transfer cases.
View Instructions Find a Distributor
Delivering outstanding protection against Chrysler 48RE shaft breakage, Sonnax extreme duty output shaft kit 22173D-01K features a unique combination of innovative engineering and quality manufacturing. Stronger materials typically used for improving weak parts can’t overcome the OE shaft’s small, 23-spline cross section. In addition to a materials upgrade, the Sonnax shaft features a significantly larger, 29-spline configuration that is based on the OE manual transmission spline.
Larger diameter allows for increased cross-section to protect against breakage
High-strength alloy balances the toughness required for shaft strength with the deep case hardness required for the one-way clutch race that is an integral part of the shaft
Includes a matching New Venture 271/273 input gear shortened to match the installation depth of the 48RE transmission
Note
Requires transfer case disassembly.
Not for use in 2WD or earlier 47RE applications with NV241 transfer case.
Contents
Transfer Case Input Shaft
Output Shaft with Bushings
Earn Up to 1278 Transparts Reward Points.
48RE Transmission Sonnax Extreme Duty Output Shaft Kit 22173D-01K
For use in 2003-2006 4WD models with NV271 or NV273 transfer cases.
View Instructions Find a Distributor
Delivering outstanding protection against Chrysler 48RE shaft breakage, Sonnax extreme duty output shaft kit 22173D-01K features a unique combination of innovative engineering and quality manufacturing. Stronger materials typically used for improving weak parts can’t overcome the OE shaft’s small, 23-spline cross section. In addition to a materials upgrade, the Sonnax shaft features a significantly larger, 29-spline configuration that is based on the OE manual transmission spline.
Larger diameter allows for increased cross-section to protect against breakage
High-strength alloy balances the toughness required for shaft strength with the deep case hardness required for the one-way clutch race that is an integral part of the shaft
Includes a matching New Venture 271/273 input gear shortened to match the installation depth of the 48RE transmission
Note
Requires transfer case disassembly.
Not for use in 2WD or earlier 47RE applications with NV241 transfer case.
Contents
Transfer Case Input Shaft
Output Shaft with Bushings
Manufacturer | Sonnax |
---|
Write Your Own Review